Box Specifications:

Materials:
  • 3/4″ two sided thermally fused melamine with either an industrial grade particle board core, a medium density fiberboard (MDF) core or any no added formaldehyde core.
  • 3/4″ wood veneers with a medium density fiberboard (MDF) core or a performance core.
  • 3/4″ plastic laminate with either an industrial grade particle board core, a medium density fiberboard (MDF) core or any no added formaldehyde core with your choice of cabinet liner, vertical or post form grade laminate backer sheet to balance the panel.
  • 3/4″ particle bore core nailer (minimum of two).
  • 1/4″ dadoed backs with a medium density fiberboard (MDF) core.
Box edge:
  • PVC edge banding of .5 mm (.018″), 1 mm (.039″), 2 mm (.070″) and 3 mm (.125″) thickness.
  • Wood veneer edge banding of .5 mm (.018″) and 1.5 mm (.0625″) thickness.
Box bore pattern:
  • 32 mm European style hardware.
  • Line bore for adjustable shelf.
  • 7 mm x 50 mm confirmant screw
  • 8 mm fluted wood dowel pin assembly holes.

Door & drawer fronts:

Materials:
  • 3/4″ two sided thermally fused melamine with either an industrial grade particleboard core, a medium density fiberboard (MDF) core or any no added formaldehyde core.
  • 3/4″ wood veneers with a medium density fiberboard (MDF) core or a performance core.
  • 3/4″ plastic laminate with either an industrial grade particleboard core, a medium density fiberboard (MDF) core or any no added formaldehyde core with your choice of cabinet liner, vertical or post form grade laminate backer sheet to balance the panel.
Door & drawer front edge:
  • PVC edge banding of .5 mm (.018″), 1 mm (.039″), 2 mm (.079″) and 3 mm (.125″) thickness.
  • Wood veneer edge banding of .5 mm (.018″) and 1.5 mm (.0625″) thickness.
Door bore pattern:
  • Blum hinge holes, 102 mm (4″) from top and bottom of door to center of cup hole.
  • Five knuckles hinge locating holes.

Drawers & roll outs:

Materials:
  • 3/4″ two sided thermally fused melamine with either an industrial grade particleboard, a medium density fiberboard (MDF) or any no added formaldehyde core, in any available color.
  • 3/4″ wood veneers with a medium density fiberboard (MDF) core or a performance core.
  • 1/4″ dadoed or applied bottoms with a medium density fiberboard (MDF) core.
  • 1/2″, 5/8″ or 3/4″ – 9 ply pre-finished Baltic Birch dovetail drawer with any 1/4″ bottom.
  • 1/2″, 5/8″ or 3/4″ hardwood dovetail drawer in any wood specie, finished to your specification.
Drawer & roll out edge:
  • PVC edge banding of .5 mm (.018″), 1 mm (.039″), 2 mm (.079″) or 3 mm (.125″) thickness.
  • Wood veneer edge banding of .5 mm (.018″) and 1.5 mm (.0625″) thickness.
Construction method:
  • 7 mm x 50 mm confirmat screw.
  • Pre-assembled Baltic birch, melamine or hardwood dovetail.

Applied end panels:

Materials:
  • 3/4″ two sided thermally fused melamine with either an industrial grade particleboard core, a medium density fiberboard (MDF) core or any no added formaldehyde core.
  • 3/4″ wood veneers with a medium density fiberboard (MDF) core or a performance core.
  • 3/4″ plastic laminate with either an industrial grade particleboard core, a medium density fiberboard (MDF) core or any no added formaldehyde core with your choice of cabinet liner, vertical or post form grade laminate backer sheet to balance the panel.
Applied end panel edge:
  • PVC edge banding of .5 mm (.018″), 1 mm (.039″), 2 mm (.079″) or 3 mm (.125″) thickness.
  • Wood veneer edge banding of .5 mm (.018″) and 1.5 mm (.0625″) thickness.

Hardware:

  • 7 mm x 50 mm confirmant screw or 8 mm fluted dowel pins, for assembly, are the only hardware included in the catalog price.
  • Door hinges and hinge plates.
  • Adjustable shelf supports.
  • Drawer slides.
  • File drawer rails for hanging files.
  • Wire dividers.
  • Accessories.